Motip Polyester Putty available in four different weight. Level irregularities like holes in surfaces of steel, aluminium, wood, concrete and polyester on your car with MOTIP 2-component Polyester Putty. Polyester Putty is elastic and very easy to sand. Polyester putty is re-sprayable with all lacquer systems and resistant to chemicals and the weather. MOTIP Polyester Putty can be applied in layers with a thickness up to 2 cm.
MOTIP POLYESTER PUTTY
From: €6.00
Description
CHARACTERISTICS
- Very easy to sand
- Elastic
- Re-sprayable with all lacquer systems
- Resistant to chemicals and weather influences
- Excellent adhesion
USAGE INSTRUCTIONS
BEFORE USE, CAREFULLY READ THE DIRECTIONS ON THE PACKAGING AND ACT ACCORDINGLY.
Processing temperature 15 – 25°C.
The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.
Mix the required amount of putty with the harder. Apply in the desired layer thickness. After hardening, sand and when desired apply a fine putty.
The drying time depends on the ambient temperature.
After use, directly clean the tools used. Do not store the surplus material, mixed with harder, in the can.
Additional information
| Brand | Motip |
|---|---|
| Type | Polyester Putty |
| Weight | 250g, 500g, 1000g, 2000g |
