Bison Silicone Transparent Card. Silicone sealant for glazing applications.
BISON SILICONE TRANSPARENT CARD
€3.50
Description
PROPERTIES
- (Sea)water resistant
- Permanently elastic
- UV and all-weather resistant
- Excellent bonding without primer
- Resistant to temperatures between -50 °C and +150 °C
- Chemical resistant
- Easy to apply
- Colourfast
- 100 % silicone
SUITABLE FOR:
Suitable for sealing joints, seams and cracks in the house, glass construction, display case construction, cars, boats and caravans. Especially suitable for bonding and sealing clear glass, frameless aquariums, display cases, display windows, glass terrariums, water basins and (double) glass constructions. Adheres to clear glass (non-coated, single-layered), ceramics, glazed tiles, enamel, metal (including aluminium) and various synthetics. Does not bond to bitumen, polyethylene, polypropylene and PTFE. Can also be used for bonding 3D carton.
BEFORE USE:
Working conditions
Only apply at temperatures between +5 °C and +40 °C.
Surface requirements
The surface must be dry, clean and free of dust, rust, paint and grease.
Tools
BISON Silicone Multi Tool for tooling the sealant.
Coverage
1 cartridge for approx. 8-15 m (depending on the diameter of the joint).
DURING USE:
Handling of packaging
Turn the cap off the tube Cut the synthetic cannula diagonally.
Directions for use
Inject the sealant evenly into the joint, then within 10 minutes tool with BISON Multi Tool or a putty knife or other tool, moistened with a soap solution. After approx. 15 minutes, a surface skin will form. Before putting plants and fish in the aquarium, bonded and/or jointed aquariums will need to air for 4-8 days. After that, the aquarium must have been filled with fresh water 3 to 4 times over a 24-hour time period.
Points of attention
Silicone hardens under the influence of humidity. Contact with humidity is therefore absolutely necessary during curing.
AFTER USE:
Stains/residue
Immediately remove stains with white spirit. The cured sealant can only be removed mechanically or with BISON silicone sealant residue remover.
Storage conditions
Store in properly sealed packaging in a dry place at between +5 °C and +25 °C.
Additional information
Brand | Bison |
---|---|
Type | Silicone Transparent Card |